(770)455-0781
MIO 120S Electric Nail File
Product Description
MIO NE116 CONTROL UNIT
- Works on 100-240V Power Supply
- Gentle Start, Soft Switching System
- Smoothly Adjustable Speed
- User Safety Design
- One Touch Forward & Reverse
- Speed Ranges 3,000-35,000 RPM
- Emergency Stop Safety Mechanism
MIO MX6 M30N HANDPIECE
- Highly Durable and Compact Handpiece
- Better Grip Design and Smooth Touch
- Lightweight, Compact & Well Balanced
- High Efficiency Coreless Micromotor
- Superb Bur Concentricity
- Lowest Vibration and Noise in its Class
- Dust Protection Mechanism
- Head Cleaning System
- Uses 3/32” Diameter Bits
- High Durability Ball Bearing
- Ring Type Bur Locking System
- Heavy-Duty Carbon Bush
DUST PROTECTION MECHANISM:
All MIO handpieces have NSK patented built-in dust protection mechanism to prevent infiltration of cutting chips into the bearing of the handpiece. It helps a smooth filing operation as it continuously sucking in the filing dust and shoots them out in an uniform manner. This way it prevents the ball bearing from filing dusts so that the bearings can run freely and the handpiece operates without any noise or vibration.
CLEAN HEAD SYSTEM
Clean Head System is another NSK patented special mechanism designed to clean the handpiece head. Immersing the nose end preferably into clean water about half-an-inch while running the handpiece at the maximum speed for about 5~10 seconds will wash out all the filing dusts and then wipe off the water from the handpiece. Performing this operation after each days use will help keep it clean, sanitized and durable.
CORELESS MICROMOTOR
Clean Head System is another NSK patented special mechanism designed to clean the handpiece head. Immersing the nose end preferably into clean water about half-an-inch while running the handpiece at the maximum speed for about 5~10 seconds will wash out all the filing dusts and then wipe off the water from the handpiece. Performing this operation after each days use will help keep it clean, sanitized and durable.
6 Months Limited Manufacturer's Warranty!
- Works on 100-240V Power Supply
- Gentle Start, Soft Switching System
- Smoothly Adjustable Speed
- User Safety Design
- One Touch Forward & Reverse
- Speed Ranges 3,000-35,000 RPM
- Emergency Stop Safety Mechanism
MIO MX6 M30N HANDPIECE
- Highly Durable and Compact Handpiece
- Better Grip Design and Smooth Touch
- Lightweight, Compact & Well Balanced
- High Efficiency Coreless Micromotor
- Superb Bur Concentricity
- Lowest Vibration and Noise in its Class
- Dust Protection Mechanism
- Head Cleaning System
- Uses 3/32” Diameter Bits
- High Durability Ball Bearing
- Ring Type Bur Locking System
- Heavy-Duty Carbon Bush
DUST PROTECTION MECHANISM:
All MIO handpieces have NSK patented built-in dust protection mechanism to prevent infiltration of cutting chips into the bearing of the handpiece. It helps a smooth filing operation as it continuously sucking in the filing dust and shoots them out in an uniform manner. This way it prevents the ball bearing from filing dusts so that the bearings can run freely and the handpiece operates without any noise or vibration.
CLEAN HEAD SYSTEM
Clean Head System is another NSK patented special mechanism designed to clean the handpiece head. Immersing the nose end preferably into clean water about half-an-inch while running the handpiece at the maximum speed for about 5~10 seconds will wash out all the filing dusts and then wipe off the water from the handpiece. Performing this operation after each days use will help keep it clean, sanitized and durable.
CORELESS MICROMOTOR
Clean Head System is another NSK patented special mechanism designed to clean the handpiece head. Immersing the nose end preferably into clean water about half-an-inch while running the handpiece at the maximum speed for about 5~10 seconds will wash out all the filing dusts and then wipe off the water from the handpiece. Performing this operation after each days use will help keep it clean, sanitized and durable.
6 Months Limited Manufacturer's Warranty!